DSC Power832 Security System PC5016 Specifikace stáhnout pdf (Strana 34)

P R O G R A M D E S C R I P T I O N S

If no code is entered the panel will Auto-Arm. If a zone is violated the panel will transmit a Partial Closing

Reporting Code

if programmed to indicate the system was not secure. If the zone is restored the panel

will add the zone back into the system.

If the No Activity Arm

option for a partition is programmed with a number other than 000, the partition will

Auto-Arm if no activity is detected for the programmed number of minutes.

The timer will begin when a delay type zone assigned to the partition is secured. The timer is

stopped if any zone assigned to the partition is tripped. The timer will restart when a delay type

zone is again restored.

When the timer expires the panel will sound the buzzer of all keypads assigned to the Partition for one

minute. If any key is pressed, the Auto-Arm will be aborted.

Zones assigned to both Partitions (Global Zones) will not stop the timer.

Time Date ...................................................... 3.4 [ ] Commands, [ ][6][1] Time and Date

Auto-Arm Time ............................................... 3.4 [

] Commands, [ ][6][3] Auto-Arm Time

Auto-Arm Cancel Reporting Code................. Section [348]

Partial Closing Reporting Code ..................... Section [343]

No Activity Arm (Partition 1) .......................... Section [162]

No Activity Arm (Partition 2) .......................... Section [163]

5.22 Keypad Lockout

The panel can be programmed to ‘lockout’ keypads if a number of incorrect user code entries are made.

After the Number of Invalid Codes Before Lockout has been reached the panel will lock out the keypad

for the Lockout Duration

and log the event to the event buffer. For the duration of the lockout the panel

will sound an error tone when any key is pressed.

Keypad Lockout will reset every hour.

To disable Keypad Lockout program the Number of Invalid Codes Before Lockout

as [000].

Number of Invalid Codes Before Lockout...... Section [012]

Lockout Duration ............................................ Section [012]

Keypad Lockout Reporting Code................... Section [338]

5.23 Keypad Blanking

If the Keypad Blanking Option

is enabled the panel will turn off all lights on the keypads except the

backlighting of the keys if no key is pressed for 30 seconds.

The panel will turn the lights back on if entry delay begins or an audible alarm occurs. The lights will also

come on if a key is pressed or, if the Code Required to Restore Blanking Option

is enabled, a valid User

Code is entered.

If the Power Save Option

is enabled the panel will blank all keypad lights including backlighting when AC

power fails, in order to conserve the back up battery.

Keypad Blanking Option ................................ Section [016], Option [3]

Code Required to Restore Blanking.............. Section [016], Option [4]

Power Save Option ........................................ Section [016], Option [6]

5.24 Loop Response

The normal loop response time for all zones is 500 milliseconds. The panel will not consider a zone

violated unless it is violated for at least 500 milliseconds.

If Zone 8 is Fast Loop Response is enabled the loop response for zone 8 will be 40 milliseconds.

Typically this can be used for vibration type sensors.

Zone 8 is Fast Loop Response ..................... Section [013], Option [5]

5.25 Keypad Tampers

If the Keypad Tampers Enable option is selected the panel will display and transmit a General System

Tamper reporting code if any keypad is removed from the wall. When the keypad tamper is restored the

panel will transmit the General System Tamper Restoral reporting code. All keypads should be properly

installed and secured before enabling this option.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Komentáře k této Příručce

Žádné komentáře

DSC Power832 Security System PC5016 Specifikace Strana 34

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu DSC Power832 Security System PC5016