DSC Power8 PC5OO5 Instalační manuál Strana 8

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 46
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 7
S Y S T E M I N T R O D U C T I O N
4
1.2.10 LINKS1000 Cellular Communicator
The LINKS1000 Cellular Communicator provides an efficient, cost-effective method for
adding cellular back up. The unit comes in its own cabinet with antenna and requires a
separate battery and transformer
(See Section 5.26 “LINKS1000 cellular communica-
tor”).
1.2.11 Alternate Communicators
LINKS2X50 - Either the LINKS2150 or LINKS2450 may be used to transmit alarm information over a long range radio
network (refer to the LINKS2X50
Installation Manual
for Installation Instructions).
Skyroute Transceiver
- -
- -
- This offers a new wireless method of communication for the transmission of events using
cellemetry service (refer to the Skyroute
Installation Manual
for Installation Instructions).
1.2.12 Cabinets
Several different cabinets are available for the PC5010 modules. They are as follows:
PC5003C Main Control Cabinet for the PC5010 main panel. Dimensions 288mm x 298mm x 78mm / 11.3” x
11.7” x 3” approximately.
PC5002C Cabinet to house the PC5204 Power Supply Output module. Dimensions 213mm x 235mm x 78mm / 8.4”
x 9.25” x 3” approximately.
PC5004C Cabinet to house the Escort5580 module and PC5400 printer module. Dimensions 229mm x 178mm x
65mm / 9” x 7” x 2.6” approximately.
PC5001C Cabinet to house the PC5108 Zone Expander Module and the PC5208 8 low-current output module.
Dimensions 153mm x 122mm x 38mm / 6” x 4.8” x 1.5” approximately.
PC5001CP Plastic Cabinet to house the PC5108 Zone Expander Module and the PC5208 8 low-current output
module. Dimensions 146mm x 105mm x 25.5mm / 5.75” x 4.2” x 1” approximately.
PC500C Control panel enclosure. Dimensions 203.5mm x 229mm x 78mm / 8.0” x 9.0” x 3.0” approximately.
PC4050C Control panel enclosure. Dimensions 369.5mm x 295.6mm x 122.3mm / 14.5” x 11.6” x 4.8” approximately.
PC4050CAR Control panel enclosure. Dimensions 369.5mm x 295.6mm x 122.3mm / 14.5” x 11.6” x 4.8” approximately.
CMC-1 Control panel enclosure. Dimensions 303.3mm x 293.1mm x 78mm /11.9” x 11.5” x 3.0” approximately.
1.2.13 Backplates
There are two different backplates available for keypads to locate an Audio Station next to the keypad:
PC55BP1 Backplate
This backplate is to be used when an Audio Station is to be located next to a
keypad. Dimensions 208mm x 115mm x 18mm / 8.2” x 4.5” x 0.25” approximately.
PC55BP2 Backplate
This backplate is to be used when an Audio Station is to be located next to a
keypad. In addition the backplate will allow you to mount a PC5108 Zone Expander
Module or the PC5208 Eight Low Current Output Module. Dimensions 208mm x
115mm x 18mm / 8.2” x 4.5” x 0.7” approximately.
1.3 Out of the Box
You should find the following equipment included in your system. Verify each of the components is included:
one PC5010 main control cabinet
one PC5010 main control circuit board
one Installation Manual
one Programming Worksheet Manual
one Instruction Manual
one hardware pack consisting of:
- five plastic circuit board standoffs - seventeen 5600 ohm (5.6K) resistors
- one 2200 ohm (2.2K) resistor - one 1000 ohm (1K) resistor
Zobrazit stránku 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 45 46

Komentáře k této Příručce

Žádné komentáře