DSC Envoy NT9010 Uživatelský manuál stáhnout pdf (Strana 3)

Installs in a ‘Flash’

AUDIO FEATURES

Internal speaker for system

programming, status

annunciation and end-user

operation.

LED INDICATORS

Ready, Armed, and System

EMERGENCY KEYS

Dual-key emergency buttons for

panic, fire, & auxiliary

KEYPAD

Large numeric keypad with

easy to read backlit buttons for

use in any lighting conditions

ONE-TOUCH FUNCTION

KEYS

16 programmable options

VOLUME CONTROL

Volume settings are low,

medium, and high

FAMILY MESSAGE

CENTER

Record or play back

messages directly or access

the message center from

anywhere in the world using

a tone (DTMF) telephone

SYSTEM STATUS

CONFIRMATION

Local or remote access to

voice-prompted system

status reports

PROGRAMMING

The Envoy installation process is fast and simple, with no need to read a lengthy

manual to program main system functions. The system is shipped ready to

install with peel-off labels, providing a quick reference guide for 'Flash'

programming.

Advanced programming provides greater flexibility in security system

customization. System modifications can include changes to entry and exit delay

times, zone definitions, and the enabling and disabling of specific system options.

You can program the Envoy system using DSC's Windows® Downloading

Software (DLS-3). DLS-3 software enables direct system programming via a

locally connected personal computer or remote programming, using a dial-up

connection. DLS-3 software can also be used to view system status, trouble

conditions, and the system’s 128-event buffer.

TELEPHONE ACCESS

Access the Envoy security system from anywhere in the world using a tone

(DTMF) telephone. The telephone, which becomes a fully functional keypad,

enables the user to remotely disarm or arm the security system and check

system status. In addition, any tone (DTMF) telephone on the premises can be

used to access the Envoy system.

Messages can also be recorded or accessed remotely using a tone (DTMF)

telephone, or locally by simply pressing the record or playback buttons on the

Envoy control unit. The system is also capable of handsfree 2-way voice

communication with the monitoring station via the system's built-in speaker and

microphone.

MORE SYSTEM FEATURES

• 32 fully programmable zones...

- two zones can be hardwired

- 23 zone types, 8 programmable zone attributes

• System supports...

- 32 wireless devices

- 16 wireless keys

- 2 keyswitches for arming & disarming the system on hardwired zones

- integral keypad on main control unit

• 38 programmable 4 or 6 digit user access codes...

- 32 user codes, 1 master code, 2 supervisor codes, 2 duress codes, and 1

maintenance code

• Keypad lockout...

- panel can be programmed to lock out keypad if a series of incorrect

access code entries is made

• ‘Quick Arm’ & ‘Quick Exit’...

- allow users to arm and exit easily

• ‘STAY’/’AWAY’ zones and ‘STAY’ arming...

- security of perimeter arming while the premises are occupied

• 8 programmable one-touch function keys with 16 options

such as ‘STAY’ arm, ‘AWAY’ arm, ‘Chime’ and ‘Quick Exit’

• 3 keypad-activated alarms... Fire, Auxiliary, and Panic

- to avoid false alarms, 2 keys for each alarm must be pressed

simultaneously and held for 2 seconds before an alarm is generated

• 3 LED indicators... Ready, Armed, and System

- allow system status to be viewed at a glance

• Keypad-activated alarm output and communicator test

• Automatic arming...

- program system to automatically arm at a specific time each day

- programmable pre-alert and bell squawk during auto-arm to notify

anyone on premises and prevent false alarms

• Built-in sounder...

- capable of ‘Fire Bell Continuous’ or ‘Temporal Three’ fire signal

- silent or audible sounder operation, programmable by zone

• Audio voice prompt system interface...

- system can interface with users via programmable audio voice prompts

- system will announce operating instructions and system events,

including alarms, troubles, zone openings/closings, and time via main

control unit speaker, remote sounder speaker or by dialing up the system

on any local or remote tone (DTMF) telephone

- some prompts can be turned on or off to customize each installation

- users can program custom zone labels using the audio label library or

they can record their own labels using the built-in recorder

1 2 3 4

Komentáře k této Příručce

Žádné komentáře

DSC Envoy NT9010 Uživatelský manuál Strana 3

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu DSC Envoy NT9010