DSC Classic PC580 Uživatelský manuál

WARNING: This manual contains information on limitations regarding product use and function andinformation on the limitations as to liability of the

6About Your Security SystemYour DSC Security System has been designed to provide you with the greatest possible flexibility and conve-nience. Read thi

7The security system has several zones of area protection and each of these zones will be connected to one ormore sensors (motion detectors, glassbrea

8Arming ErrorAn error tone will sound if the system is unable to arm. This will happen if the system is not ready to arm (i.e. sen-sors are open), or

9When Alarm SoundsThe system can generate 2 different alarm sounds:Continuous Siren = Intrusion (Burglary Alarm)Temporal / Pulsed Siren = Fire AlarmIn

104. To unbypass a zone, enter the two-digit number of the zone(s) to be bypassed (01-64). You can also use the keys to find the zone, and then pre

11Trouble ConditionsWhen a trouble condition is detected, the Trouble ( ) or System indicator will turn on, and the keypad will beepevery 10 seconds.

12For systems using multiple partitions/areas, access codes can be assigned to specific or multiple partitions/areas.Please contact your alarm company

13Bell Squawk AttributeThis attribute is used to determine whether an access code should generate an arming/disarming Bell Squawkupon entry of the cod

14[2] Auto-arm Control Pressing [2] while in the User Function menu will enable (3 beeps) or disable (one long beep) the Auto-arm fea

15Changing Brightness/ContrastWhen this option is selected, the keypad will allow you to scroll through 10 different brightness/contrast levels.1. Pre

FCC COMPLIANCE STATEMENTCAUTION: Changes or modifications not expressly approved by Digital Security Con-trols could void your authority to use this e

16Refer to the following chart:[1] - A, B, C, 1 [6] - P, Q, R, 6[2] - D, E, F, 2 [7] - S, T, U, 7[3] - G, H, I, 3 [8] - V, W, X, 8[4] - J, K, L, 4 [9]

17Testing Your SystemNOTE: If you are going to perform a System Test, call your Monitoring Station to inform them when you begin and also when you end

18Guidelines for Locating Smoke DetectorsResearch has shown that all hostile fires in homes generate smoke to a greater or lesser extent. Experiments

19Household Fire Safety AuditRead this section carefully for important information about fire safety.Most fires occur in the home. To minimize this da

20New Zealand Telecom NetworkThe following is a list of warnings applicable when this equipment is connected to the New Zealand Telecom Network : Gene

Limited WarrantyDigital Security Controls warrants the original purchaser that for a period oftwelve months from the date of purchase, the product sha

Notes

Notes

©2005 Digital Security ControlsToronto, Canada • www.dsc.comPrinted in Canada WARNING Please Read CarefullyNote to InstallersThis warning contains

iPowerSeries System Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

iiErasing an Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1PowerSeries System KeypadsFunctionLightsZoneLightsStatusLightsFunctionButtonsEmergencyKeys[PC5532ZYour installer may have installedone of these LED k

2123456780*#9StayAwayChimeResetBypassPK5508/PK5516 (shown)PK5500/PK5501StatusLightsNumberPadEmergencyKeysZoneLights[PC1555RKZLCD5511DisplaySystem Ligh

3Keypad Display Symbols 1 Clock Digits 1, 2 – These two 7 segment clock digits indicate the hour digits when the local clock is active, and identifyth

4Reference SheetsFill out the following information for future reference and store this guide in a safe place.Access CodesMaster Code [40] : ________

5Sensor / Zone InformationSensor Protected Area Sensor Type Sensor Protected Area Sensor Type01 3302 3403 3504 3605 3706 3807 3908 4009 4110 4211 4312